Wireless networks have a very important role in our day to day. There are many devices that connect without cables to the network. However, it must also be borne in mind that stability and good quality are often not present. In this article we are going to talk about some tricks or tips so that the Wi-Fi signal reaches the entire house and does not have speed problems.
How to make the Wi-Fi signal reach the whole house better
Surely on some occasion we have all been to a point in the house where the wireless connection does not work well. We may have coverage and we can connect to the network, but the speed is very limited and also cuts and instability are frequent.
This is very common. Wi-Fi networks, although they have improved significantly over the years, are still very sensitive to distance and possible obstacles. This means that on many occasions we cannot connect as we would like.
Luckily there are some factors that we can take into account to improve Wi-Fi coverage . The objective is to reduce problems to the maximum and be able to connect from the entire house.
Place the router well, key
Without a doubt, the location of the router is a very important factor for the signal to reach the entire home correctly. It is a mistake that you are in an isolated room from where we really need coverage.
Our advice is that it is located in a central area, from where it distributes well everywhere. It must also be in an elevated location.
Avoid devices that may interfere with the wireless signal
Of course there are devices that can interfere with the signal . The interesting thing is that our router does not have other devices next to it that could affect it. In this way we will avoid that the quality of the connection declines and that it can be distributed well throughout the house.
The premise is that the more isolated the router is from other devices, the better. Therefore it is essential to choose well where we are going to place it.
Use signal amplifiers and extenders
Something that is very present is the use of network amplifiers . Basically they are devices that allow us to bring wireless coverage closer to other areas. Here it should be mentioned that we have different options available and each one can be interesting in certain circumstances.
A very good option to achieve maximum speed is to use PLC devices . These equipments work through the electrical network and we can connect from other corners of the home easily.
We can also use Wi-Fi repeaters, which work more easily but not with the same results.
The problem may be in the Wi-Fi channel
Have you tried changing the Wi-Fi channel ? If we are connected to a highly saturated one, the quality of the coverage may decrease. This will affect the performance of the devices. It can especially happen if we live in a building where there are many networks available and they are connected to the same channel.
Our advice is to use tools that help us choose the best channel to connect. This way we will make the most of the resources.
Is the router power set correctly?
Most modern routers allow you to configure the signal strength . This can be a double-edged sword. On the one hand we can make it decrease the power to avoid possible attacks. For example, if we are going to connect only to the side of the device, we can prevent any neighbor or possible intruder from seeing the network.
However, in case we have the power configured very weak, it will mean that we will not be able to connect from more distant areas. Therefore it is convenient to take a look at the configuration of the router and make sure that it is 100%.
Try changing bands
Finally, one more trick to improve Wi-Fi is to change bands . As we know we can use the 2.4 GHz band and the 5 GHz band. Each one is interesting in certain circumstances.
We can say that the 2.4 GHz band is the best to connect from a long distance to the router. If we are using the 5 GHz, the signal may not come well and the problem is there.