We already know that the mobile battery is one of the elements that suffers the most and deteriorates before. But we also forget about the charger, an element that we connect day in and day out also to charge our phone. Surely you have ever put it to charge and the charge is not completed, it is slower than normal or it does not directly charge the battery level. It can be due to many reasons, and in this article we are going to give you solutions to know the problems of your mobile charger.
Before you proceed to buy a new cable, adapter or in the worst case scenario for your pocket, a new phone, you should bear in mind that in most cases these are problems that can be easily solved. In fact, the most common is that the problem comes from the charging device itself and you only have to change one of the parts, although it may also be the case that it is a problem with the mobile.
Is it a cable or mobile failure?
It seems like a simple question, but it is far from it. When we see that our mobile does not charge, we usually blame the battery, since as we said it is one of the most fragile elements of our device. However, the charging port is usually the most common problem when we find ourselves with the situation of not being able to charge our phone, since its pins deteriorate as we plug it into the charger.
On the other hand, there are times when the cable is the culprit. To check if the problem comes from here, the simplest solution is to put your mobile to charge with another cable . In this way, if you see that your phone charges correctly, you will already know where the problem comes from. Finally, the power outlet can also be the cause, although this usually occurs very rarely. If you want to make sure, use another outlet in your house and put the mobile to charge. If you see that it does it normally, you have already encountered another problem.
If the problem is with the cable or charger …
Damaged or broken USB cable
Just as we worry about taking care of our mobile, we do not pay the same attention to the USB cable. This can deteriorate very easily, since we use it practically daily to charge our device. In addition, when we travel we usually roll it up and unwind it in a bad way, without forgetting another bad habit: keeping the cable taut while charging the mobile.
With the passage of time and prolonged use, the charging connector pins can be damaged and not make good contact with the mobile. In this case, it is very common that when we find that our device does not load and we move the position of the cable, the load works intermittently. In addition, the plastic that surrounds the cable itself can also “peel” and, as a consequence, the internal connectors can be damaged. In the event that it does not work, you will have to buy another, although this component is usually cheap.
Check the status of the adapter
If we have already made sure that the cable works correctly and our mobile still does not charge, the fault could be with the adapter . Like the previous one, adapters can break down over time, and in some cases the failure can be preceded by a power surge or overheating. It may also be a poor quality adapter and therefore not long-lasting. If you want to check if it is a problem with this, connect your mobile to a computer through a USB cable. If you recognize it, the problem will be with this.
Unlike cables, adapters are more expensive. But the main factor to take into account before buying a new one is that we must make sure that it uses the same voltage as ours. And if we buy an original one from the same manufacturer, all the better.
Is it compatible with your mobile?
When we buy a mobile, they all incorporate their original charger. But when it comes time to change it, we usually turn to cheaper options to save us some money. This can be a problem for our phone as it can harm its longevity and battery health. Nor is it a matter of buying the same charger or getting the best on the market, but you have to take into account several points.
Before buying a new one, we must look at the amperage and voltage that our device supports. The values of our future charger should never be higher than the specifications that appear in the technical sheet of our mobile, especially the second, since the battery can overheat and even damage the motherboard. Therefore, the best solution is to buy an original one to make sure that it will not damage the battery of our terminal.
Where to find chargers for your mobile
As we have already said, each mobile is assigned an adapter specifically designed to suit each one. However, we can always bet on other options that are not from the same manufacturer and even if they do not match, they will ensure that we extend the useful life of our device. Here you have a complete guide with the official chargers of all manufacturers. You have wired and wireless charging systems, as well as accessories for your car.
On the other hand, you can also bet on a universal charger . These are very versatile, and can be connected to all kinds of devices, such as tablets, cameras and inculco portable chargers. In addition, it works with all types of voltages and capacities and they are more efficient than conventional ones, since the load control is much more precise than and we will save problems of overheating. Here below we give you two good options.
If your mobile does not charge because of the mobile
Clean the connector
Sometimes the USB port can get dirty. This port tends to collect dirt or dust easily, since it is always outdoors. If it’s dirty, we can do several things. The simplest is to blow hard into the groove so that the surface disappears. Another solution is to use a pin , toothpick, or other very fine item. With the mobile off , we will proceed to insert it into the port to gradually remove all the dirt.
The connector is damaged
It is common that due to continued use and continuous charging, the internal component of the port is moved or directly damaged, which causes the contact not to occur correctly and does not charge the battery. As in the previous case, we can use something thin and sharp and, very carefully, exert a little force on the pins to try to straighten them. However, in most cases we will have to bring our phone to fix.
Reset the battery
A very good option that we can apply if we believe that the mobile battery is poorly calibrated. This occurs when it shows us erroneous charge percentages, when it does not fully charge or when it turns off unexpectedly before its time. These factors can also affect the health of the battery and reduce its useful life considerably. If you want to reset the battery, you just have to follow these steps:
- The first thing you have to do is charge your phone completely. If you think it is out of calibration, let it charge for a few more minutes even if it has reached 100%.
- The next step is to download your mobile completely until it shuts down on its own.
- When the battery runs out, let it sit for 3-4 hours . This will clean up residual excess loads that cause decalibration.
- Once you have allowed that time to pass, recharge the mobile completely . It must be off. If you want to make sure, wait a few more minutes after reaching 100%.
- Finally, turn on the mobile and use it normally.
Update your mobile
Another possible solution is to update our phone to the latest version of its operating system. Some layers of customization with a wrong optimization can cause a high battery consumption and make the autonomy of the mobile less than it had previously. Therefore, it is best to wait for the next update to try to solve the problem. To do this, you must do the following:
- Access your phone’s Settings.
- Inside, look for the Software Update tab.
- Click on the Download and install option.
- An update will not always be available, so in these cases you will have to wait to try to solve the problem. If you have automatic download with Wi-Fi enabled , you will receive a notification when a new version is available.
Restore the factory mobile
If all the previous solutions have not worked, the last option we have is to restore the phone to its factory settings. Doing this is a decision of extreme necessity, although it usually solves the failures or problems of our mobile. First of all, remember to make a backup copy to save all your data, since as you know your mobile will be completely empty. To restore it from the factory, we must follow the following steps:
- In the Settings of our mobile, we go to the General Administration section
- Within this, we look for the Reset tab
- Here you have several options. Press the Factory Reset option.